Can anyone help me with a script error?

My overlay keeps going back to zone 1 and I feel like I have tried everything to get it where I need but it just goes right back to it’s starting point.

INT. MANSION ENTERTAINMENT ROOM - DAY
&KAT spot 1.280 152 13 in zone 1 AND KAT faces right
@overlay INT.DARTBOARD create
&overlay INT.DARTBOARD opacity 1
@overlay 5016682746150912_INT.DARTBOARD shifts to 209 316 in zone 2
@overlay 5016682746150912_INT.DARTBOARD scales to 1.054 1.054
@overlay INT.DARTOL 1 create
&overlay INT.DARTOL 1 opacity 1
@overlay 5016682746150912_INT.DARTOL 1 shifts to 188 161 in zone 1
@overlay 5016682746150912_INT.DARTOL 1 scales to 0.478 0.478

&KAT is stab_knife_overhand_angry_start

&overlay 5016682746150912_INT.DARTOL 1 shifts to 152 433 in zone 1 in 1.2
&overlay 5016682746150912_INT.DARTOL 1 scales to 0.478 0.478 in 1.2

&pan to zone 2 in 1
@overlay 5016682746150912_INT.DARTOL 1 shifts to 205 378 in zone 2 in 1
@overlay 5016682746150912_INT.DARTOL 1 scales to 0.478 0.478 in zone 2
@overlay INT.DARTOL1 to layer 4

&zoom on 608 394 to 214% in 1

Please help!

1 Like

For the 9th line, is the “zone 1” supposed to be there?

1 Like

Let me see if it changes if I move it to 2

1 Like

Okay!

1 Like

So now it’s randomly sticking to the side of zone 2? And i repositioned twice.

1 Like

INT. MANSION ENTERTAINMENT ROOM - DAY
&KAT spot 1.280 152 13 in zone 1 AND KAT faces right
@overlay INT.DARTBOARD create
&overlay INT.DARTBOARD opacity 1
@overlay 5016682746150912_INT.DARTBOARD shifts to 209 316 in zone 2
@overlay 5016682746150912_INT.DARTBOARD scales to 1.054 1.054
@overlay INT.DARTOL 1 create
&overlay INT.DARTOL 1 opacity 1
@overlay 5016682746150912_INT.DARTOL 1 shifts to 188 161 in zone 1
@overlay 5016682746150912_INT.DARTOL 1 scales to 0.478 0.478

&KAT is stab_knife_overhand_angry_start

&overlay 5016682746150912_INT.DARTOL 1 shifts to 152 433 in zone 2 in 1.2
&overlay 5016682746150912_INT.DARTOL 1 scales to 0.478 0.478 in 1.2

&pan to zone 2 in 1
@overlay 5016682746150912_INT.DARTOL 1 shifts to 220 379 in zone 2 in 1
@overlay 5016682746150912_INT.DARTOL 1 scales to 0.478 0.478
@overlay INT.DARTOL1 to layer 4

&zoom on 608 394 to 214% in 1

1 Like

ah, the problem is that you tried moving the overlay to 2 positions at the same time using &.
Instead try-
&overlay 5016682746150912_INT.DARTOL 1 shifts to 152 433 in zone 2 in 1.2
@overlay 5016682746150912_INT.DARTOL 1 scales to 0.478 0.478 in 1.2

&pan to zone 2 in 1

@overlay 5016682746150912_INT.DARTOL 1 shifts to 220 379 in zone 2 in 1
@overlay 5016682746150912_INT.DARTOL 1 scales to 0.478 0.478

1 Like

OMG THANK YOU IT WORKED!!!

1 Like

Yesssss! :grin: :grin: :grin: :grin:

1 Like

Also Good Luck with your story, I’m sure it’ll be great! <3

1 Like

Thank you!!

1 Like

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.