Coding errors 2 need fixing


#1

Error 1:
image
image
Coding used:
@cut to zone 3
&MIA spot % x y AND MOLLY spot % x y AND MOLLY faces right AND MIA is talk_gossip AND MOLLY is nod_loop
&MOLLY faces left AND MOLLY is idle AND MIA is idle

Error 2:
image
Coding used:
@ADRIAN enters from right to screen center in zone 1 at layer 0 AND HAZEL enters from right to screen right in zone 1 at layer 0

Error 3:
image
Coding used:
&ADRIAN walks to spot 1.280 160 -44 in zone 1 at layer 0 AND HAZEL walks to spot 1.280 279 -41

Error 4:
image
image
Coding used:
@cut to zone 2
@MUM spot 1.028 299 102 in zone 1 at layer 2AND MUM is sleep_sitting AND DAD spot 0.983 190 186 in zone 1 at layer 1 AND DAD is sit

Error 5:
image
Coding used:
@AMBER enters from right to spot 1.082 5 140 in zone 1 at layer 4

Error 6:
image
Coding used:
@overlay 5931931018067968_BLUSH SECRETDESTINYXX shifts to -592 1377
@overlay 5931931018067968_BLUSH SECRETDESTINYXX scales to 1.594 1.594
@5931931018067968_BLUSH SECRETDESTINYXX moves to layer 4


#2

Error 1:
You need to add actual spot numbers instead of using % x y

Error 2:

Remove “in zone # at layer #” from those commands. The enters command is just: @CHARACTER enters from direction to position

Error 3:

Remove the layer number from the walking command.

Error 4:

You need a space between “2” and “AND”

Error 5:

Remove the zone and layer.

Error 6:

You need to add the word “overlay” before the overlay name.


#3

So for error 1 do I have to just put numbers and no letters or percentage sign?
Also so @overlay numbers BLUSH SECRETDESINTYXX overlay shifts or scales?


#4

It’s spot direction. That’s what % x y is.

Just add the word “overlay” (I bolded where you should put the word)


#5

Check out this:

From this:

S has to be a number, X needs to be a number and Y needs to be a number.

Read this:
@ROB spot S X Y
@ROB spot % x y
Both of these are not commands that you would put into your story, but instead, you would need to substitute numbers for them.

An example:

@ROB spot 1.320 280 0