Need help with codingg!

Creator's Corner
1

Hey So im having a script problem. Basically im having a person named Raavi walk to one place and do a transition_stand_to_sit in a other spot. But for some reason when i do that, It only takes the left,right up and down position, but not the scaling numbers, if that makes sense. How do I fix this!!! Pictures shown below

EXT. GEORGIA DOWNTOWN - DAY with INT. COMPACT CAR BACKSEAT BLACK - DAY at layer 1
&zoom on 322 261 to 122% in 0

&cut to zone 3
&ALIYAH spot 1.593 482 -89 in zone 3
&RAAVI spot 1.806 446 -146 in zone 3
@pause for 1

&pan to zone 1 in 2.3 and zoom on 725 290 to 122% in 2.3
&ALIYAH walks to spot 1.593 55 -88 in zone 3 in 2
@RAAVI walks to spot 1.806 213 -152 in zone 1 in 2

&RAAVI spot 1.984 244 -109 in zone 1
@RAAVI is transition_stand_to_sit and RAAVI faces right

image
image420×799 95.2 KB

2

Put the following between the walk and the spot commands:

@pause for 0.01

There is a bug with size changing when you have a spot command immediately after a walks to command.

3

If I understood correctly, you do NOT want him to change sizes?

The issue would then be in the “1.984.” For all the other lines, you have his scaling set to 1.806. You would just need to switch 1.984 with 1.806 and you should be good from there.

1 Like