Tappable Overlay Help!

In my story, there is a mission report you must go through. Here is my current code right now.

@YOU walks to spot 0.830 190 241 in zone 1 in 3
YOU (think)
(Now, where’d I put the folder?)
YOU (kneel_reach)
(There it is!)
@YOU starts idle_hold_envelope AND YOU faces right
@pause for a beat
label missiondetails
INT. BRISTOLS DORM ROOM - DAY
@cut to zone 1
@overlay MISSION - COVER create
@overlay MISSION - COVER opacity 1 in 0
@overlay 4948207009660928_MISSION - COVER shifts to 2 198
@overlay 4948207009660928_MISSION - COVER scales to 0.657 0.657
@overlay MISSION - COVER rotates 25 anchor point 0 0 in 0
readerMessage Tap the Mission Folder when you would like to see the next page.

tappable
“MISSION - COVER” {
@YOU spot 0.830 31 257
@overlay MISSION - COVER clear
@overlay MISSION - 1 create
@overlay MISSION - 1 opacity 1 in 0
@overlay 4948207009660928_MISSION - 1 shifts to 112 170
@overlay 4948207009660928_MISSION - 1 scales to 0.369 0.369
}
“MISSION - 1” {
@YOU spot 0.830 31 257
@overlay MISSION - 1 clear
@overlay MISSION - 2 create
@overlay MISSION - 2 opacity 1 in 0
@overlay 4948207009660928_MISSION - 2 shifts to 112 170
@overlay 4948207009660928_MISSION - 2 scales to 0.369 0.369
}
“MISSION - 2”{
@YOU spot 0.830 31 257
@overlay MISSION - 2 clear
@overlay MISSION - 3 create
@overlay MISSION - 3 opacity 1 in 0
@overlay 4948207009660928_MISSION - 3 shifts to 112 170
@overlay 4948207009660928_MISSION - 3 scales to 0.369 0.369
}
“MISSION - 3”{
@YOU spot 0.830 31 257
@overlay MISSION - 3 clear
@overlay MISSION - 4 create
@overlay MISSION - 4 opacity 1 in 0
@overlay 4948207009660928_MISSION - 4 shifts to 112 170
@overlay 4948207009660928_MISSION - 4 scales to 0.369 0.369
}
“MISSION - 4”{
@YOU spot 0.830 31 257
@overlay MISSION - 4 clear
@overlay MISSION - 5 create
@overlay MISSION - 5 opacity 1 in 0
@overlay 4948207009660928_MISSION - 5 shifts to 112 170
@overlay 4948207009660928_MISSION - 5 scales to 0.369 0.369
}
“MISSION - 5”{
@YOU spot 0.830 31 257
@overlay MISSION - 5 clear
NARRATOR
Would you like to review the Mission Details again?
choice
“Yes please!”{
goto missiondetails
}
“I’m all good!”{
goto continue3
}
}

label continue3
@YOU changes into YOU_angel
@YOU spot 0.830 190 241 in zone 1 at layer 2

The first tappable overlay (Mission - Cover) wokrs fine and it goes to the second tappable (Mission - 1), but the character pops up again. Thats why i tried having them stand off screen. Nothings working after that, but it says its fine! Help?
P.S.: @Dara.Amarie i have looked at your guide but its still not working for me!

If you want them to tap on each overlay in order, you would need to make separate “tappable” choices for each.

tappable
“MISSION - COVER” {
@YOU spot 0.830 31 257
@overlay MISSION - COVER clear
@overlay MISSION - 1 create
@overlay MISSION - 1 opacity 1 in 0
@overlay 4948207009660928_MISSION - 1 shifts to 112 170
@overlay 4948207009660928_MISSION - 1 scales to 0.369 0.369
}

tappable
“MISSION - 1” {
@YOU spot 0.830 31 257
@overlay MISSION - 1 clear
@overlay MISSION - 2 create
@overlay MISSION - 2 opacity 1 in 0
@overlay 4948207009660928_MISSION - 2 shifts to 112 170
@overlay 4948207009660928_MISSION - 2 scales to 0.369 0.369
}

tappable
“MISSION - 2”{
@YOU spot 0.830 31 257
@overlay MISSION - 2 clear
@overlay MISSION - 3 create
@overlay MISSION - 3 opacity 1 in 0
@overlay 4948207009660928_MISSION - 3 shifts to 112 170
@overlay 4948207009660928_MISSION - 3 scales to 0.369 0.369
}

tappable
“MISSION - 3”{
@YOU spot 0.830 31 257
@overlay MISSION - 3 clear
@overlay MISSION - 4 create
@overlay MISSION - 4 opacity 1 in 0
@overlay 4948207009660928_MISSION - 4 shifts to 112 170
@overlay 4948207009660928_MISSION - 4 scales to 0.369 0.369
}

tappable
“MISSION - 4”{
@YOU spot 0.830 31 257
@overlay MISSION - 4 clear
@overlay MISSION - 5 create
@overlay MISSION - 5 opacity 1 in 0
@overlay 4948207009660928_MISSION - 5 shifts to 112 170
@overlay 4948207009660928_MISSION - 5 scales to 0.369 0.369
}

tappable
“MISSION - 5”{
@YOU spot 0.830 31 257
@overlay MISSION - 5 clear
NARRATOR
Would you like to review the Mission Details again?
choice
“Yes please!”{
goto missiondetails
}
“I’m all good!”{
goto continue3
}
}

Thanks so much! I’ll change it. But how do I get my character to not keep appearing on screen?

Once you change it, your character won’t keep popping up.

The reason why she was popping up was because of how you had only 1 tappable choice. When you tapped on the “MISSION - COVER” overlay in the tappable choice, it goes straight to the label continue3.